Aerospace Project And Seminar Topic On Space Mouse Technology

Title : Space Mouse
Department Of Aerospace Engineering
Project Intro: Every day of your computing life, you reach out for the mouse whenever you want to move the cursor or activate something. The mouse senses your motion and your clicks and sends them to the computer so it can respond appropriately. An ordinary mouse detects motion in the X and Y plane and acts as a two dimensional controller. It is not well suited for people to use in a 3D graphics environment. Space Mouse is a professional 3D controller specifically designed for manipulating objects in a 3D environment. It permits the simultaneous control of all six degrees of freedom - translation rotation or a combination. The device serves as an intuitive man-machine interface The predecessor of the spacemouse was the DLR controller ball. Spacemouse has its origins in the late seventies when the DLR (German Aerospace Research Establishment) started research in its robotics and system dynamics division on devices with six degrees of freedom (6 dof) for controlling robot grippers in Cartesian space. The basic principle behind its construction is mechatronics engineering and the multisensory concept. 
The spacemouse has different modes of operation in which it can also be used as a two-dimensional mouse.
You can also Subscribe to Aerospace Engineering by Email for more such projects and seminar.

Seminar Topics And Mini Project Titles For Aerospace/Aeronautical Engineering

Aerospace Engineering Topics And Seminar Topics And Mini Project Titles
A below is the best collection all old and new Aerospace And Aeronautical Engineering Seminar Topics And for the year 2011:

1. Socio-Cognitive Analysis of the GSFC Mission Design Laboratory
2. Cryogenics
3. UPC-Orion
4. Hubble Space Telescope Servicing Mission 4 Highlights
5. GSFC Sciences and Exploration Directorate
6. GSFC and the Operationally Responsive Space Office: A new Paradigm for Space Mission Implementation

7. Relative Navigation Sensors System used on HST Servicing Mission 4
8. Hubble Space Telescope Servicing Mission Four (HST SM4) Unique Safety Challenges for STS-125
9. Model Based Systems Engineering and the Constellation Program
10. Engineering Safety: Lessons in Risk Communication from the BP Disaster
11. Autonomous and Autonomic Space Exploration Systems
12. Complexity Measurement Correlation to Program Success
13. Defect Detection and Prevention (DDP): A Tool for Managing Risk
14. Introduction to INCOSE and the Role of INCOSE at GSFC
15. Systems Engineering at GSFC
16. NASA IV&V
17. An Insider& Guide to Designing Spacecraft Systems and Instruments for Operation in the Natural Space Radiation Environment
18. STS-102 Mission Experiences and Systems Engineering Lessons Learned
19. Earth Science Technology Program
20. Overview of Systems Engineering at BAE Systems, Marine
21. Overview of Alenia Marconi Systems
22. Systems Engineering Process at BAE Systems
23. NASA/GSFC Space Internet Activities, Extending Internet Technology Into Space
24. Instrument Systems Engineering
25. Lunar Communications & Navigation Architecture
26. GSFC Safety and Mission Analysis Division Code 300 - A Value Added Organization
27. Shared Knowledge and Information Flow in Systems Engineering
28. A Comparison of Human and Robotic Servicing of the Hubble Space Telescope
29. System Engineering Entry, Descent and Landing for the Mars Science Laboratory Mission
30. Performance and Early Results of Wide Field Camera 3
31. A Powerful New Imager for the Hubble Space Telescope
32. Max Launch Abort System (MLAS)
33. Orbital Debris Protection and Prevention for GSFC Missions
34. Engineering a Successful Mission: Lessons from the Lunar Reconnaissance Orbiter
35. A Tale of 10 Centers: Observations in Systems Engineering Cultures Across NASA
36. NASA Systems Engineering Leadership Development Program (SELDP)
37. ESD Sensitivity & Protection (GSFC Safety Week)
38. GSFC Safety Week
39. Model-based Systems Engineering (MBSE) with SysML
40. Goddard Space Flight Center Flight Dynamics Facility
41. International Council on Systems Engineering (INCOSE)
The Related Files Attachments for the Above Given Topics will be Updated ASAP.
You can also Subscribe to Aerospace Engineering by Email for more such projects and seminar.

Aerospace Engineering Seminar Topics Project Tiltes And PPT's List

Aeronautical And Aerospace Engineering Seminar Topics And Project Titles
List given Below are the Seminar Topics And project Titles for Aeronautical And Aerospace:

1. Improvement and Implementation of Aerospace testing technology
2. Variable specific impulse magnetoplasma rocket
3. Advanced Space Vision System
4. High Altitude Aeronautical Platform Stations (HAAPS)
5. Nose cone design
6. Military application in Space
7. Space Agencys
8. Testing Challenges for Space Exploration Systems
9. Flight Software System Integration and Test
10. Structural health monitoring
11. Damage and failure analysis
12. Structural dynamics and aeroelasticity
13. Testing Challenges for Human-Rated Space Systems
14. Nanocoating in Space Crafts
15. Nanotechnology & Aero Space
16. Max Launch Abort System(MLAS)
17. Lunar space elevator
18. W-LAN and UMTS in aircraft cabins
19. Fixed-wing aircraft
20. Internet applications in aeronautics
21. Role of Nano Technology in Aeronautical Engineering
22. Aeronautical satellite comunications
23. Advanced Space Vision System
24. High Altitude Aeronautical Platform Stations
25. Aeroelasticity
26. Max Launch Abort System(MLAS)
27. Lunar space elevator
28. nternet applications in aeronautics
29. Aeronautical satellite comunications
30. Nanocoating in Aeroplanes
31. Magnetoplasmadynamic thruster
32. Scram jet
33. BlackBox
The Related Files for the Above Topics will be Updated As Soon As Possible.
You can also Subscribe to Aerospace Engineering by Email for more such Projects and Seminar Topics.

Aerodynamics Referrence Book

AERODYNAMICS
SECOND EDITION
A COMPLETE COURSE IN ELEMENTARY AERODYNAMICS WITH EXPERIMENTS AND EXAMPLES
PREFACE TO SECOND EDITION: The present edition is enlarged to provide, in the first place, an introduction to the mathematical and experimental study of compressible flow, subsonic and supersonic. This and other matters now becoming prominent are not collected in a supplementary section but incorporated in place as additional articles or short chapters. Following a well-established practice, the numbering of original articles, figures and chapters is left undisturbed as far as possible, interpolations being distinguished by letter-suffixes. It is hoped this procedure will ensure a minimum of inconvenience to readers familiar with the earlier edition. To some extent the unlettered articles indicate a first course of reading, though a modern view of Aerodynamics requires consideration of Mach numbers equally with Reynolds numbers almost from the outset. Other matters now represented include various theories of thin aerofoils and the reduction of profile drag. The brief account of the laminar-flow wing is in general terms, but the author has drawn for illustrations on the conformal system, in the development of which he has shared more particularly. The original text is revised to bring it up to date, and also in the following connection. Experience incidental to the use of the book at Cambridge and London Universities isolated certain parts where the treatment was insufficiently detailed for undergraduates ; these are now suitably expanded. The aim of the book remains unchanged. It does not set out to collect and summarise the researches, test results and current practice of the subject, but rather to provide an adequate and educational introduction to a vast specialist literature in a form that will be serviceable for first and higher degrees, and like purposes, including those of the professional engineer.
Click below links for the Aerodynamics Book:
To Save the Book into your Folder click on Save as PDF to your Folder.

Aerospace And Material Engineering Project on PROCESS FOR COMPLEX ELECTRONIC UNIT

Title: ANALYSIS OF CASTING PROCESS FOR COMPLEX ELECTRONIC UNIT
Development Of Aerospace and Materials Engineering
Project Aim And Summary: This thesis consists of six main chapters.
Chapter 1 gives a general introduction to the thesis.
Chapter 2 discusses the general concepts involved with process and material selection as well as brief descriptions of aluminum alloys, casting processes and simulation of casting processes.
Chapter 3 lays down the main tasks performed and decisions made prior to simulation, which includes modification of the geometry as well as choice of material (alloy) and process. Chapter 4 presents some simulation results and discusses various changes and improvements made on the simulation of the processes. Chapter 5 gives a rough cost estimation of the chosen processes and the last chapter. 
Chapter 6 gives the conclusion part of the whole thesis.
In addition, reference materials used for this thesis and an appendix, consisting of various tables and figures, are provided in chapters 7 and 8 respectively.
The aim of this thesis work was to:
1. Modifying the products geometry to have better castability
2. Choose a casting process
3. Choose an alloy material
4. Have a sample gating system
5. Show areas susceptible to defects
6. Proposal of secondary processes and testing
7. A rough cost estimation

Abstract: Most aircraft component are currently being manufactured by machining, forging, welding and also assembling such parts. However, the possibilities of cutting cost from a single component has brought about a growing trend towards looking into casting as a possible option for manufacturing aircraft parts. This thesis was done at the request of Saab Avitronics. It evaluates the possibilities of one aircraft part, a chassis for an electronic unit that was first designed to be machined from a blank, to be cast. The thesis goes through the multifaceted tasks of product development. Casting process selection, cast alloy selection as well as geometry modification were some of these tasks that were performed in this thesis. It also evaluates the performances of chosen casting processes, the design of gating systems as well as various process parameters set, by simulating the casting processes. The alloy chosen was A356.0 with a T6 temper and the casting processes chosen were plaster mold casting and rheocasting. The geometry of the original chassis, which had very thin sections and undercuts which were complex to cast, was modified and made easier to cast with an acceptable slight increase of mass and size. The modification done on the geometry as well as the gating systems used had proven to be worthwhile, as the simulation of both process showed that such a part can be casted with no crucial defects foreseen. However, probable cavities might occur at the very tip of the chassis‟s thin-fins – that it has for carrying away heat. Minor subsurface porosities might also be formed, which would not impair the function of the chassis. The modified chassis was made as close to as finished piece as possible, for the purpose of reducing machining costs. The cost of producing such a part by casting was also seen to be much less than machining it from blank. This could be taken as rationale for casting the chassis with thicker sections, to avoid problems that may arise in casting, and to subsequently machine these faces later, as it would still be cheaper than machining the chassis from a blank.
Key Words: design for casting, casting process selection, simulation of rheocasting, simulation of plaster mold casting, casting cost estimation.
You can also Subscribe to AerospaceEngineering by Email for more such projects and seminar.

Donate To Maintain

Dear Readers, Donate at-least INR (1/-) on your visit. So, That serves me to maintain this Blog.

Followers